漏粪板模具尺寸：105×60×5、150×60×7、220×60×10、240×60×11、300×60×11 单位（cm）
1、漏粪板采用单模设计，脱模方便、快捷。(使用时不易产生裂纹，不破损，使用寿命长)。
2、漏粪板模具比老式的漏粪板模具少了两排孔，降低了钢筋数量从而减少了制作成本。
3、漏粪孔之间的距离加大，加强了水泥漏粪板的承重量。
4、加大了漏粪孔的倾斜角度，从而脱模更加顺畅，只需两个人抬着，反扣过来即可脱出。
5、以往的漏粪板拼到一起，连接地方会有缝隙，而欧式漏粪板两边均为一半宽度的孔，可以拼接在一起，组成一个完整的漏粪孔，不仅美观还提高了漏粪效率。
Hebei Djin mould factory produces leaky dung board mould *, pig floor drain mould, sheep floor drain mould, etc. all kinds of moulds for cement leaky manure plates specially used in aquaculture are of complete size, good quality and spot wholesale. Welcome to order!
Dimensions of mould for leaking plate: 105 *60 *5, 150 *60 *7, 220 *60 *10, 240 *60 *11, 300 *60 *11 units (cm)
1. The leaky dung board is designed with single mold, which is convenient and quick. It is not easy to produce cracks when used, not damaged, and has long service life.
2. The fecal leak plate mold has two rows of holes less than the old fecal leak plate mold, which reduces the number of reinforcing bars and thus reduces the production cost.
3. The distance between the leaks is increased, and the loading capacity of the cement leaking plate is strengthened.
4. Increase the inclination angle of the leak hole, so that the demoulding is more smoothly. only two people need to lift it and buckle it back out.
5. In the past, when the leak boards were joined together, there would be gaps in the connecting place, while the European leak boards had holes of half width on both sides, which could be joined together to form a complete leak hole, not only beautiful but also improved the leak efficiency.